The How To's of Vinyl Siding Installation

When your house needs to be re-sided, you have many options. Vinyl siding has grown in popularity immensely with its easy installation and carefree maintenance. Because it is so easy to install, many people have taken to doing it themselves. Although this is a great option, you need to be aware of a few things before diving right in. Below are a few pointers that will help you along in the vinyl siding installation process:


The Easy Steps to Vinyl Siding Installation

Once you've gotten to the point of having all of your materials together, you are ready to start the siding your house. You will want to tie back any braches that may interfere with your work area. Also, take down any light fixtures so you have easier access. Make sure all the old caulk is scrapped off so that your siding will lay flat against the house. It is best to start out by siding around the doors and windows. Then, it is time to attach your nail strip to the bottom of the house. When you are nailing the siding pieces, overlap them by �� an inch. This creates a more esthetically pleasing look.

Leave Room for Expanding

One thing to note about vinyl siding is that it will expand, so it is always best to start by nailing down the center and working your way out. Also, you will want to hammer the nails until they are 1/16th of an inch from going all the way in. This will allow room for the siding to expand and retract slightly as the weather changes. If it happens that you need to put a nail where there isn't a pre-made hole, make sure to use a nail punch rather than just nailing through the vinyl siding.

If you follow these tips, you will have your vinyl siding installation take place in no time at all!